For use with Waterproofing Underlayments in Concrete Slabs with drains.
Drains with Membrane Clamp
Call Us, Toll Free: 888-244-3417
Waterproofing Drain System
Primary & secondary weep holes.
Foe use with Underlayment
Square Top Drain
A membrane clamping floor drain is used particularly in waterproofing deck applications. The purpose of a membrane clamping ring is to create a watertight seal around the drainage opening to prevent water from leaking through to the underlying structure or concrete slabs above ground floor level.
- Top Plate: 12" x12 " Square with Solid Cover
- 12 Ga. Concrete Setting Ring - 2.5" Below Top Plate
- Outlet Size - 2" | 3" | 4" | 6" | 8"
- Dran Outlet (4" L) - Sch 10 or Sch 40
- Sump Body Depth - 6.25" | 10"
- T304 Stainless
- Built to Last a Lifetime
- 1/2" Thick Stainless Top Plate & Cover (std)
- Forklift Rated - 10,000# per ASME 112.6.3
- 12 GA Body - Seamless Spun
- Sanitary | Non-Corrosive & Heat Resistant
- T304 or 316 Stainless (Made in USA)
Product Specification:
CD12SMC-FD: 12 x 12 x 6.25" deep with Membrane Clamping Ring & Weep Holes, 12 gauge, all type 304 (CF8) stainless steel square industrial floor drain with loose set anti-tilt extra-heavy-duty perimeter drainage cover, 1/2" top plate frame, perforated removable bucket basket with lift handle, pre-sloped bottom sump, and pre-pour concrete stabilizing anchor ring.
We offer a full line of commercial grade custom floor drains.
Follow us on Social Media