- Home
- Floor Drains
Stainless steel floor drains
Seamless, spun 12 GA bodies with large-radius corners for fast sanitizing. Rated for 12,500 lb forklift traffic and built for new construction or replacement.
18 drains
12×12 Industrial Floor Drain
Our best seller. Solid cover, sediment bucket.
12"×12" TOP · T304 / 316L
12×12 Square Top Drain
Seamless spun body, stocked in 3", 4" and 6" outlets.
12"×12" TOP · T304 / 316L
Low-Profile Square Drain
Shallow body for thin slabs and retrofits.
12"×12" TOP · T304 / 316L
Square Deep Sump Drain
Extra sump volume for heavy solids.
12"×12" TOP · T304 / 316L
Square Side Outlet Drain
Horizontal outlet where depth is limited.
12"×12" TOP · T304 / 316L
Square Trap Primer Drain
Primer connection keeps the trap sealed.
12"×12" TOP · T304 / 316L
Square Membrane Clamp Drain
Clamping ring for waterproof membranes.
12"×12" TOP · T304 / 316L
Cone Bottom Drain
Sloped body for complete self-draining.
12"×12" TOP · T304 / 316L
Outlet Strainer Drain
2nd strainer stops large objects entering drain lines.
12"×12" TOP · T304 / 316L
X-tra Heavy Duty Trap Drain
Integral water trap & cleanout — no P-trap required.
12"×12" TOP · T304 / 316L
Anti-Bacteria Box Drain
Flushable water seal blocks airborne Listeria.
12"×12" TOP · T304 / 316L
12" Round Top Drain
Heavy duty, traffic rated round top.
12" ROUND TOP · T304 / 316L
Round Commercial Floor Drain
Sanitary round drain for kitchens and plants.
12" ROUND TOP · T304 / 316L
Round Low-Profile Drain
2.5" shallow sump for limited depth.
12" ROUND TOP · T304 / 316L
Round Deep Sump Drain
12" round top with deep sump body.
12" ROUND TOP · T304 / 316L
Round Side Outlet Drain
Round top, horizontal outlet.
12" ROUND TOP · T304 / 316L
Round Trap Primer Drain
Keeps the P-trap water seal from drying out.
12" ROUND TOP · T304 / 316L
Round Membrane Clamp Drain
Round top with membrane clamping ring.
12" ROUND TOP · T304 / 316L
No drains match those filters. We build to custom specs — tell us what you need.
Food-safe drain systems
Commercial & industrial buildings
Regulations for industrial floor drains in food, beverage and dairy processing vary by region and are typically governed by local, state and federal agencies such as the USDA and FDA, in addition to industry standards. Compliance is vital for processing facilities to guarantee food safety and maintain cleanliness.
We build three families of sanitary drainage:
- Area drains (aka point drains or pot drains) — the floor drains on this page.
- Trench drains (aka open trough or channel trench).
- Slot drain systems (aka narrow slot).
Every floor drain includes
- 12 GA body
- T304 or 316L stainless
- Forklift rated
- Outlets 2" – 8"
- Perforated basket
- Seamless construction
- Sanitary design
- Concrete setting ring
FDA quality, industrial approved.
Large inventory of 12" drains with 3", 4" and 6" outlets — usually ships in 24–48 hours.